Skip to content
Youngcrest Trading Company logoYOUNGCRESTTrading Company

Exporter — India

Bulk spice & vegetable powders, shipped from India to your plant.

Youngcrest supplies dehydrated onion powder, garlic powder, moringa leaf powder and coriander powder to food processors, seasoning houses and distributors across the Middle East, Asia, Africa, Europe and North America — on FOB, CIF or CFR terms.

  • Onion · Garlic · Moringa · Coriander powders
  • FOB Nhava Sheva & Mundra — CIF worldwide
  • COA with every shipment, samples before you order

Speak to Samarth Ankam directly — +91 7499880224 · WhatsApp

Speak to Koshal Bhandakkar directly — +91 7770067612 · WhatsApp

Bowls of freshly milled spice powders on a dark surface, representing Youngcrest's export range

4

Powder lines

25 kg

Standard pack

1 MT

Trial MOQ

  • IEC holder

    Importer-Exporter Code issued by DGFT

  • Export documentation handled

    Invoice, packing list, B/L, COO, phytosanitary, COA

  • Private label & custom packing

    Buyer-branded artwork and pack sizes to specification

  • Sample-first policy

    Approve the sample before you commit to an order

Export range

Four powder lines, specified for industrial buyers

Each line is supplied to an agreed mesh, moisture and microbiological specification, packed for container freight and shipped with its Certificate of Analysis.

Dehydrated white onion powder and dried onion slices ready for bulk export from IndiaHS 0712 20 00

Onion Powder

Allium cepa L.

Milled from white onion of the Maharashtra and Gujarat belt. Free-flowing, low-moisture, consistent pungency batch to batch.

Dehydrated garlic powder and fresh garlic bulbs prepared for bulk export from IndiaHS 0712 90 40

Garlic Powder

Allium sativum L.

High-pungency dried garlic milled to 80–120 mesh. Off-white, uniform, and free of the bitterness that comes from over-drying.

Bright green moringa leaf powder with fresh Moringa oleifera leaves for exportHS 1211 90 99

Moringa Powder

Moringa oleifera Lam.

Shade-dried, leaf-only moringa milled to 80–200 mesh. Vibrant green, stem-free, and built for nutraceutical buyers.

Ground coriander powder milled from Coriandrum sativum seeds for bulk spice exportHS 0909 22 00

Coriander Powder

Coriandrum sativum L.

Milled from cleaned, sortex-grade Eagle and Scooter seed. Warm, citrus-forward aroma with volatile oil held above 0.3%.

How we work

From first enquiry to sailing — six clear steps

Most buyers want to know exactly what happens after they press send. This is the whole process, and where you sit in it at every stage.

  1. 01

    Enquiry

    You send product, mesh size, quantity, destination port and any specification you must meet. We confirm feasibility the same or next business day.

  2. 02

    Sample dispatch

    A 100–250 g representative sample goes out by courier with its specification sheet, so your QA team evaluates the actual material before anyone commits.

  3. 03

    Quotation — FOB or CIF

    A written offer with unit price, packing, Incoterm, port of loading, lead time and validity period. No hidden line items added later.

  4. 04

    Order confirmation

    Proforma invoice issued, payment terms agreed, production slot booked. Your artwork is finalised here if you are taking private label.

  5. 05

    Quality check & documentation

    Batch tested and a COA raised against your agreed specification. Export documents prepared in parallel; third-party inspection arranged if you want it.

  6. 06

    Dispatch & tracking

    Container stuffed and sealed, B/L released, and the full document set couriered and emailed. You get the container number and sailing schedule.

Quality & compliance

What we check, and what you receive as proof

A supplier is only as good as the batch that arrives. Here is what happens between the field and your container, and the documentation that evidences it.

  • Sourcing

    Raw material is bought from established growing belts — onion from Maharashtra and Gujarat, garlic from Gujarat and Madhya Pradesh, coriander from Rajasthan, moringa from the southern and western belts. Lots are selected on maturity, dryness and freedom from sprouting or rot before they ever reach the line.

  • Cleaning & grading

    Destoning, magnetic separation and sieving remove stones, metal, chaff and extraneous matter. Sortex-grade seed is used for coriander. Undersized, discoloured and damaged material is graded out rather than milled in.

  • Moisture control

    Drying is run to a controlled curve and moisture is checked at dryer exit, after milling and again at packing. Moisture is the single biggest driver of caking, mould and lost shelf life in powders, so it is the number we watch hardest.

  • Lab testing

    Each batch is tested for moisture, ash, acid insoluble ash, mesh conformity, colour and microbiology — total plate count, yeast and mould, Salmonella and E. coli. Pesticide residue and heavy-metal screening is run where the destination market requires it.

  • COA with every shipment

    A Certificate of Analysis against the agreed specification travels with every consignment, referenced to the batch and packing date. Retention samples are held so any query after arrival can be checked against what actually shipped.

  • Third-party inspection on request

    Nominate SGS, Bureau Veritas, Intertek or your own agent for pre-shipment inspection, drawing of samples and container loading supervision. We recommend it on a first order — it costs you little and settles the question of consistency.

Food technologist testing a powder sample in a quality control laboratory

Standard test panel

  • Moisture & total ash
  • Acid insoluble ash
  • Mesh / particle size conformity
  • Colour and appearance
  • Total plate count, yeast & mould
  • Salmonella and E. coli

Logistics & shipping

Ports, terms, lead time and the document set

Everything you need to slot us into an existing supply chain — including the paperwork your customs broker will ask for.

Ports of loading

  • Nhava Sheva (JNPT), Mumbai — INNSA
  • Mundra, Gujarat — INMUN

Air freight from Mumbai (BOM) for samples and urgent trial quantities. LCL consolidation available where a full container is not yet justified.

Lead time

Samples
3 – 5 working days
Standard packing
12 – 18 working days
Private label
18 – 25 working days

Measured from confirmed order and receipt of advance to gate-in at port of loading.

Incoterms supported

FOB
Delivered and loaded at Nhava Sheva or Mundra; you nominate the line and carry freight from there.
CIF
We book the vessel and cover freight and insurance to your named port of discharge.
CFR
Freight to your port covered by us; you arrange marine insurance at your end.

Not sure which term suits you? Tell us your destination port and we will quote both FOB and CIF so you can compare landed cost properly.

Container terminal at dusk with gantry cranes loading a cargo vessel

Documents provided

  • Commercial Invoice
  • Packing List
  • Bill of Lading
  • Certificate of Origin
  • Phytosanitary Certificate
  • Certificate of Analysis (COA)

Arranged on request

  • Health / free-sale certificate
  • Fumigation certificate
  • Legalised or chamber-attested documents
  • Non-GMO, allergen and vegan declarations

Why Youngcrest

Six reasons buyers stay after the first container

Sourcing from India is rarely difficult. Getting consistent material, honest lead times and complete paperwork — repeatedly — is.

  • One point of contact, start to finish

    You deal with the same person from enquiry to Bill of Lading. No handover between a sales desk and a documentation desk, and no reply that starts "let me check with the team".

  • Sample before you commit

    Every buyer gets material from real production, with its spec sheet, before an order is confirmed. If the sample does not clear your QA, there is no order to argue about.

  • Specifications written down, then met

    Mesh, moisture, ash, microbiology and colour are agreed in writing and tested against the shipped batch. The COA travels with the goods, not two weeks later.

  • Export paperwork handled in-house

    Commercial invoice, packing list, B/L, Certificate of Origin, phytosanitary certificate and COA prepared as a set. Missing or late documents are the most common reason a container sits at destination — that is on us to prevent.

  • Packing built around your line

    25 kg kraft bags with liner, 10/20 kg cartons, or your own branded packs. Tell us how the material enters your process and we pack to suit it.

  • Straight answers on price and lead time

    A written offer with the Incoterm, port of loading, validity and lead time stated. If a crop is short or a price cannot hold, you hear it before you plan around it.

Buyer FAQ

The questions importers ask us first

If your question is not here, send it with your enquiry — we would rather answer it before you order than after.

What is your minimum order quantity?

For onion, garlic and coriander powder the trial MOQ is 1 MT, with 5 MT and above for regular contracts. Moringa leaf powder starts at 500 kg. If you need a smaller first shipment to run a plant trial, tell us — we will look at combining products in one container.

Do you send free samples?

Yes. We dispatch a 100–250 g sample with its specification sheet against a confirmed courier account number, or with freight paid at your end. The material is drawn from the same production we would ship, not a show sample.

What are your payment terms?

Standard terms are 30% advance with the balance against a scanned Bill of Lading, or an irrevocable L/C at sight from a prime bank. Terms for repeat buyers are negotiable.

Do you offer private label and custom packing?

Yes. We pack under your brand and artwork in 25 kg kraft bags, 10/20 kg cartons or retail packs. You supply print-ready artwork and any statutory label text for your market; we handle the rest.

What is your lead time?

Typically 12–18 working days from confirmed order and advance receipt to gate-in at port, depending on quantity, packing and current crop availability. Private-label runs add roughly a week for packaging production.

Which markets do you serve?

We quote worldwide and ship from Nhava Sheva (JNPT) and Mundra. Buyers in the Middle East, South-East Asia, Africa, the EU, the UK and North America are all served on FOB, CIF or CFR terms.

Which documents come with the shipment?

Commercial Invoice, Packing List, Bill of Lading, Certificate of Origin, Phytosanitary Certificate and a Certificate of Analysis as standard. Health certificates, fumigation certificates and legalised documents are arranged when your market requires them.

Can we appoint a third-party inspection agency?

Yes, and we encourage it on a first order. Nominate SGS, Bureau Veritas, Intertek or your own agent for pre-shipment inspection and container loading supervision, at your cost.

Next step

Tell us what you need — we will quote it

Send the product, mesh size, quantity and destination port. You get a written FOB or CIF offer, usually within one business day.